
| New surfaces | Surfaces must be dry and free from dirt, grease and other contaminants. Smoothen surface with sandpaper then clean off and dry. |
| Previously painted surface | Polish the surface with sandpaper to enhance better adhesion. Chalky or peeling surface must be thoroughly cleaned with water and leave completely dried. |
| Metal | Metal must be dry and free from dirt, grease and other contaminants. Ferrous substrate should be sanded or wire-brushed to remove mill scales and rust then clean off and dry. |
| Surfaces | Primer (1-2 Coat) | Top Coat | Dilution |
| Concrete Cement Masonry Gypsum Tile Plaster |
AG-11 (White) Diluted with Clean water 10-20% |
Hato Gold Silver pearl (2 Coats) |
Brush: Diluted with Hato TG-04 or Acrylic Thinner 10-20% Spray gun: Diluted with Hato TG-04 or Acrylic Thinner 1 GL : 1.5 GL or 150% |
| Brass Iron Glass Alloy Stainless steel Resin Fiberglass Ceramic Wood Aluminium |
G-116 (White) Diluted with Hato TG-04 or Acrylic Thinner Brush: 10-20% Spray gun: 1 GL : 1.5 GL or 150% |