
                    
                    
                    
                    
                    
                    
                    
                | New surfaces | Surfaces must be dry and free from dirt, grease and other contaminants. Smoothen surface with sandpaper then clean off and dry. | 
| Previously painted surface | Polish the surface with sandpaper to enhance better adhesion. Chalky or peeling surface must be thoroughly cleaned with water and leave completely dried. | 
| Metal | Metal must be dry and free from dirt, grease and other contaminants. Ferrous substrate should be sanded or wire-brushed to remove mill scales and rust then clean off and dry. | 
| Surfaces | Primer (1-2 Coat) | Top Coat | Dilution | 
| Concrete Cement Masonry Gypsum Tile Plaster  | 
AG-11 (White) Diluted with Clean water 10-20%  | 
Hato Gold White pearl (2 Coats)  | 
Brush: Diluted with Hato TG-04 or Acrylic Thinner 10-20% Spray gun: Diluted with Hato TG-04 or Acrylic Thinner 1 GL : 1.5 GL or 150%  | 
| Brass Iron Glass Alloy Stainless steel Resin Fiberglass Ceramic Wood Aluminium  | 
G-116 (White) Diluted with Hato TG-04 or Acrylic Thinner Brush: 10-20% Spray gun: 1 GL : 1.5 GL or 150%  |