Hato Shield

5 Gallon, 2.5 Gallon, 1 Gallon

Catalogue

Technical data sheet

  • Features
  • Surface preparation
  • Coating system
HATO SHIELD made with 100% pure acrylic emulsion and light fasted pigment in order to give excellent outdoor durability for tropical climate. The special quality pigment delivers rich & beautiful long lasting colours. Excellent adhesion, durable and outstanding Anti-Dirt picked up performance. It is suitable for the decoration and protection of all exterior & interior on Masonry, primed plaster, concrete, concrete blocks, brickwork, cement render, ceilings, gypsum, and wood surfaces. Good algae resistance, no lead and mercury added. 10 years Durability.

  • 100% Pure super shield acrylic latex with special quality pigments.
  • Semi-gloss film
  • Provides for extreme hide and coverage for fewer coats
  • Dirt picks up resistance and self-cleaning ability.
  • Superior adhesion
  • Anti-efflorescence and excellent alkali resistance.
  • Outstanding durability against even the harshest weather conditions
  • Anti-fungus and algae
  • Free from lead and mercury
  • Low VOCs


Fresh concrete Allow the surfaces dry at least 2 days in case of speedy work. The surface must be clean and free from dirt, grease, oil, wax, salt, and other contaminants.
New surfaces Allow adequate time for the surface to dry out completely. The surface must be free from efflorescence. Brush down or scrape off any loose material and cement splashes.
Previously painted surfaces If previously paintwork is still in good condition washing down with clean water or brushing to remove dust and dirt. Powdery and chalky surfaces must be scrubbed and cleaned with water. Fungus and Mildew growth must be clean off with hypochlorite solution and allow for drying out at least 2-3 days.
Surfaces Primer Top Coat Dilution
Fresh concrete Apply 1-2 coats of Hato Super Primer All in one
HA2038 (Water-based)
Hato Shield
(2 Coats)
Clean water
10%
New surfaces
Previously painted surfaces