Hato Polyurethane Glitter

1 Gallon

Technical data sheet

  • Features
  • Surface preparation
  • Coating system
HATO Polyurethane glitter is a aliphatic polyurethane mixture of 2 parts (2K) Part A : Part B is isocyanate. Suitable for cement and concrete that needs high weather durability. For decoration such as outdoor architecture, spirit house, King of Nagas, Temple stairs and outdoor sculpture. 

  • Provides a multi-dimensional sparkling to surfaces reflect to sunlight and light
  • High amount glitter, glitter not settling
  • UV resistance
Surfaces Surface Preparation
Metal Metal must be dry and free from dirt, grease and other contaminants.
Ferrous substrate should be sanded or wire-brushed to remove mill scales and rust then clean off and dry.
Concrete Cement
Masonry Gypsum
Wood
Surfaces must be dry and free from dirt, grease and other contaminants.
Smoothen surface with sandpaper then clean off and dry.
Outdoor sculpture Application system
Primer Top Coat Hato Polyurethane Glitter
Apply 1 coat of Hato Polyguard Epoxy Enamel (2K)
PART A : PART B 
4 : 1 by Volume

Diluted with
Hato Polyguard Epoxy Enamel Thinner (EPT710) 
Brush: 10-20%
Spray gun: 100-150%
by Volumn

Use within 8 hours
after mixing PART A with PART B
Apply 1-2 coat of Hato Acrylic Enamel 
Diluted with
Hato Acrylic Enamel Thinner
(ACT720)
 Brush : 10-20%
Spray gun: 100-150%
by Volume


Apply after primer application 6-12 hours
Apply 1-2 coat of
Hato Polyurethane Glitter (2K)
PART A : PART B 
4 : 1 by Volumn

Diluted with
Hato Polyurethane Glitter Thinner (GLT730)
 Brush : 10-20%
Spray gun: 100-150%
by Volume

Use within 4 hours
after mixing PART A with PART B