|Metal||Metal must be dry and free from dirt, grease and other contaminants.
Ferrous substrate should be sanded or wire-brushed to remove mill scales and rust then clean off and dry.
|Surfaces must be dry and free from dirt, grease and other contaminants.
Smoothen surface with sandpaper then clean off and dry.
|Apply 1 coat with Hato Polyguard Epoxy Enamel (2K)
Dilution ratio PART A : PART B
4 : 1 by Volume
Mixing and Stir until the mixture is homogeneous.
Leave 10-15 minutes before application.
Use within 8 hours after mixing PART A with PART B
Hato Polyguard Epoxy Enamel Thinner
Spray gun: 100-150%