Find store
Hato Polyurethane- Features
- Surface preparation
- Coating system
HATO Polyurethane is a moisture cured polyurethane finish for dried wood. It produced by special polyurethane resin, clear hi-gloss, good flexibility, high impact strength, chemical & heat resistance, highly resistant to scratch and abrasion. Suitable for all kinds of wood coating application such as parquet, indoor wood courtyard and wood furniture that is exposed with sunlight occasionally, especially areas near window and balcony
- A transparent film with hi-gloss
- Heat resistance
- Easy to apply with apparent and hi-gloss film
- Excellent resistant to scratch & abrasion
- Long-lasting
- Excellent resistant to slamming force
- Excellent resistant to chemical & heat
- Free from lead and mercury
| New Surfaces | Use sandpaper to sand the wood surface until smooth Fill all wood crack and hole by filler Sand again until the smooth surface is obtained The surfaces must be clean and free of dirt, grease, oil, wax, salt, and other contaminants |
| Old Surfaces | Loose material must be removed by stiff brush The surfaces must be clean and free of dirt, wax, salt, old paint, and other contaminants |
- Surfaces must be dry and free from dirt, grease and other contaminants, polish the surface with sandpaper to enhance better adhesion.
- Brush: For the first coat dilute with HATO Urethane thinner TUT100 15-20% by volumn and 10% for the subsequent coats, recommended applying 2-3 coats.
- Spray gun: Dilute with HATO Urethane thinner TUT100 20% by volumn, recommended applying 2-3 coats.
- Allow at least 6-8 hours to dry before recoating. Complete dry is about 24 hours.
- Do not use any primer such as shellac, varnish or lacquer
back