Hato Polyguard Epoxy Enamel

1 Gallon

Catalogue

Technical data sheet

  • Features
  • Surface preparation
  • Coating system
HATO Polyguard Epoxy Enamel is a mixture of 2 parts (2K) Part A : Part B is polyamide-epoxy.

Use as a primer for decoration outdoor architecture such as spirit house, King of Nagas, Temple stairs and outdoor sculpture.

Use as a Top coat (Interior only) for Industrial factory, warehouse and chemical processing plants. Excellent chemical resistance and abrasion resistance.

  • Strong adhesion
  • Durable to moisture and extreme weather conditions.
  • Great solidity, durable to bending, hitting and rubbing
  • Prevent the alkalinity from cement
  • Anti-fungus and algae
Surfaces Surface Preparation
Metal Metal must be dry and free from dirt, grease and other contaminants.
Ferrous substrate should be sanded or wire-brushed to remove mill scales and rust then clean off and dry.
Concrete Cement
Masonry Gypsum
Wood		 Surfaces must be dry and free from dirt, grease and other contaminants.
Smoothen surface with sandpaper then clean off and dry.
Primer Dilution
Apply 1 coat with Hato Polyguard Epoxy Enamel (2K)
Dilution ratio PART A : PART B 
4 : 1 by Volume
Mixing and Stir until the mixture is homogeneous.
Leave 10-15 minutes before application.

Use within 8 hours after mixing PART A with PART B		 Diluted with
Hato Polyguard Epoxy Enamel Thinner
(EPT710) 
Brush: 10-20%
Spray gun: 100-150%
by Volume
back