Hato Coat A100

1 US Gallon, 1/4 US Gallon

Catalogue

Technical data sheet

  • Features
  • Surface preparation
  • Coating system
HATO COAT A-100 is fast drying gloss acrylic enamel based on pure acrylic resin which has been ready mixed for applying. No thinner is needed. Gives super hard and tough film, high gloss and also excellent adhesion. It can be used both interior and exterior as a top coat on any surfaces even on emulsion paint to prevent dust and dirty and for long durability purposes. Since it based on pure acrylic resin is has weathering properties and chemical resistance and to withstand the Ultra Violet degradation from the sunlight.

  • High gloss & Dirt resistance
  • Effective in waterproofing
  • Easy to use, apply by brush, roller or spray gun
  • Gives super hard and tough film, fast drying
  • Excellent adhesion
  • Weathering properties and chemical resistance
  • Anti-fungus and algae
  • Free from lead and mercury
The substrate must be free from loose or weak particles, dust, dirt, grease, oil, wax, salt, and other contaminants
In case of mould and algae, brush and clean then leave it dry for 24 hrs. before coating with HATO A100 Water Repellent Gloss
Apply the first coat of HATO A100 Water Repellent Gloss by using brush, roller or spray gun then leave it dry for 3-4 hrs.
Apply a second coat of HATO A100 Water Repellent Gloss then leave it dry for 3-4 hrs.
May require a third coat if the substrate is very porous for excellent gloss