Ultima Shield

5 Gallon, 2.5 Gallon, 1 Gallon

Technical data sheet

  • Features
  • Surface preparation
  • Coating system
HATO ULTIMA SHIELD is based on 100% pure acrylic latex and combined with the special pigment. They are able to resist saponification on the alkaline substrate, mildew growth, weather and to withstand the U.V. degradation from sunlight. They also impart excellent adhesion and durability. HATO ULTIMA SHIELD are non-mercuric and non-leaded pure acrylic emulsion paints so they able to apply for exterior and interior.

  • 100% Pure acrylic latex with Ultra premium grade pigments.
  • Cross-Linked Polymer Latex Technology
  • Dirt picks up technology
  • Semi-gloss film
  • Provides for extreme hide and coverage for fewer coats
  • Self-cleaning ability & Scrubb resistant
  • Superior adhesion
  • Anti-efflorescence and excellent alkali resistance.
  • Outstanding durability against even the harshest weather conditions
  • Anti-fungus and algae
  • Free from lead and mercury
  • Low VOCs 

Fresh concrete Allow the surfaces dry at least 2 days in case of speedy work. The surface must be clean and free from dirt, grease, oil, wax, salt, and other contaminants.
New surfaces Allow adequate time for the surface to dry out completely. The surface must be free from efflorescence. Brush down or scrape off any loose material and cement splashes.
Previously painted surfaces If previously paintwork is still in good condition washing down with clean water or brushing to remove dust and dirt. Powdery and chalky surfaces must be scrubbed and cleaned with water. Fungus and Mildew growth must be clean off with hypochlorite solution and allow for drying out at least 2-3 days.
Surfaces Primer Top Coat Dilution
Fresh concrete Apply 1-2 coats of Hato Super Primer All in one
HA2038 (Water-based)

Hato Ultima Shield
(2 Coats)

Clean water 10%

New surfaces
Previously painted surfaces